2-1 merge collector/tailpipe
$174.95
This is a custom 2-1 stainless merge collector and 30 degree mandrel bend tailpipe, suitable for custom fabricating your own Hawk exhaust system. The collector slips over the stock 1.5" headpipes, and is properly spaced on the inlet side. The outlet is sized so that the 2" tailpipe slips over it. This is a DO IT YOURSELF kit. It is NOT FINISHED. You are getting the 2 parts, and you have to use your imagination/skillz for the rest. There are no brackets of any kind. Clamp it on, weld it on, spring it on- I don't care what you do, but it is your baby to finish. The tailpipe has long enough legs that you can cut it to place the muffler where you want. You can also shorten the headpipes to place the collector where you want. Like I said- use your imagination! If you need a generic aluminum muffler, I also have those for $89.95. Fab one of these puppies up, and you will have about the same power as a full M4 system for half the cost!!

http://www.hordpower.com/index.php?main_page=product_info&cPath=1_26&products_id=330&zenid=e441713d906466404a01cfbbac3a8225